STS Transfer Film Curing Ovens – Open Top Model

OVERVIEW

The STS Transfer Film Curing Oven – Open Top Model is a dedicated curing unit designed for Direct-to-Film (DTF) printing workflows. It precisely heats and cures printed film with TPU adhesive powder so the transfers are ready for pressing onto textiles. This oven supports consistent, repeatable results in production and small workshop environments.

It plays a key role in the DTF workflow between printing/powdering and pressing. After powder application, the curing oven melts and gels the adhesive powder evenly into the film so the print will properly bond during heat-press transfer.

The unit features simple digital controls and a timer that make set-ups straightforward and repeatable. A completion alarm alerts operators when the curing cycle is done, helping maintain throughput and avoid over- or under-curing.

Designed for ease of use and durability, this oven has a compact footprint and operates on standard 110 V power, making it practical for various production spaces.

FEATURES

• Cures DTF transfer film up to a 15″ × 24″ size (open top).

• Digital temperature and timer controls for precision and consistency.

• Audible alarm signals cycle completion.

• Reaches curing temperatures up to 150 °C (302 °F).

• Compact and easy to operate in small production areas.

• Standard 110 V power supply for general workshop electrical setups.

• Exterior dimensions approximately 27″ × 6″ × 19.5″ (open top).

• Adjustable curing period (0 – 999 seconds) via digital timer.

• Power consumption around 1,350 W.

WHY IT IS RECOMMENDED

The STS Open Top Curing Oven is a good choice for DTF shops and print-to-textile operations seeking a reliable way to finalize transfers before pressing. Its digital controls and timer ensure each print cure cycle is repeatable, reducing waste and improving consistency in finished garments.

Compact dimensions and standard power requirements make this oven suitable for smaller workspaces that still require industrial-grade performance. The audible completion alarm also helps avoid mistakes, especially in busy or multi-operator environments.

By handling the curing step efficiently, this oven helps complete the DTF workflow in a controlled manner, ensuring adhesive is properly activated and bonded to the film before transfer.

FAQ

What size films can this oven handle?
It cures transfer films up to approximately 15″ × 24″ in the open top model.

What temperature range does it support?
It can reach curing temperatures up to about 150 °C (302 °F).

Can it notify me when curing is done?
Yes; it includes an alarm that sounds when the cycle is complete.

Is this oven difficult to operate?
No; it uses straightforward digital timer and temperature controls for ease of use.

What power supply does it need?
It runs on a standard 110 V supply.

Pair this oven with reliable DTF printing and powder application equipment to ensure seamless curing and high transfer success rates across your workflow.